//////////////////////////////////////////////////////////////////////////
// Mapper169                                                            //
//////////////////////////////////////////////////////////////////////////

#include "DirectInput.h"

#include "VirtuaNESres.h"
#include "App.h"

class	Mapper169 : public Mapper
{
public:
	Mapper169( NES* parent ) : Mapper(parent) {}

	void	Reset();
	BYTE	ReadLow ( WORD addr );
	void	WriteLow( WORD addr, BYTE data );
	void	Write( WORD addr, BYTE data );
	void	PPU_Latch( WORD addr );
	void	PPU_ExtLatchX( INT x );
	void	PPU_ExtLatch( WORD ntbladr, BYTE& chr_l, BYTE& chr_h, BYTE& attr );
	BYTE	PPU_ExtLatchSP();

	//for FDC code by fanoble
	void	FdcHardReset(void);
	void	FdcSoftReset(void);
	static void FdcNop(Mapper169* thiz);
	static void FdcReadTrack(Mapper169* thiz);
	static void FdcSpecify(Mapper169* thiz);
	static void FdcSenseDriveStatus(Mapper169* thiz);
	static void FdcWriteData(Mapper169* thiz);
	static void FdcReadData(Mapper169* thiz);
	static void FdcRecalibrate(Mapper169* thiz);
	static void FdcSenseIntStatus(Mapper169* thiz);
	static void FdcWriteDeletedData(Mapper169* thiz);
	static void FdcReadID(Mapper169* thiz);
	static void FdcReadDeletedData(Mapper169* thiz);
	static void FdcFormatTrack(Mapper169* thiz);
	static void FdcSeek(Mapper169* thiz);
	static void FdcScanEqual(Mapper169* thiz);
	static void FdcScanLowOrEqual(Mapper169* thiz);
	static void FdcScanHighOrEqual(Mapper169* thiz);
	typedef struct tagFDC_CMD_DESC
	{
		BYTE	bWLength;
		BYTE	bRLength;
		void	(*pFun)(Mapper169*);
	} FDC_CMD_DESC;

protected:
	BYTE	YX_type, reg[8];
	BYTE	a3;
	INT		key_map_row;
	BYTE	cmd_4800_6,cmd_4800_7,cmd_4800_8;
	BYTE	cmd_5500_3,cmd_5500_8;
	BYTE	cmd_5501_8;
	BYTE	MMC3_mode,MMC3_reg,MMC3_prg0,MMC3_prg1;
	BYTE	MMC3_chr4,MMC3_chr5,MMC3_chr6,MMC3_chr7;

	INT		read_mode,read_mode1;

private:
	void	SetBank_CPU();
	void	WriteCPU_PRAM( WORD addr, BYTE data );
	void	MMC3_WriteH( WORD addr, BYTE data );
	void	MMC3_SetBank_CPU();
	void	MMC3_SetBank_PPU();

	LPBYTE	Load_DiskIMG();
	LPBYTE	lpDisk, DISK;

	//for FDC code by fanoble
#define FDC_MS_BUSYS0		0x01	// FDD0 in SEEK mode
#define FDC_MS_BUSYS1		0x02	// FDD1 in SEEK mode
#define FDC_MS_BUSYS2		0x04	// FDD2 in SEEK mode
#define FDC_MS_BUSYS3		0x08	// FDD3 in SEEK mode
#define FDC_MS_BUSYRW		0x10	// Read or Write in progress
#define FDC_MS_EXECUTION	0x20	// Execution Mode
#define FDC_MS_DATA_IN		0x40	// Data input or output
#define FDC_MS_RQM			0x80	// Request for Master, Ready

#define FDC_S0_US0			0x01	// Unit Select 0
#define FDC_S0_US1			0x02	// Unit Select 1
#define FDC_S0_HD			0x04	// Head Address
#define FDC_S0_NR			0x08	// Not Ready
#define FDC_S0_EC			0x10	// Equipment Check
#define FDC_S0_SE			0x20	// Seek End
#define FDC_S0_IC0			0x40	// Interrupt Code
#define FDC_S0_IC1			0x80	// NT/AT/IC/XX

#define FDC_S1_MA			0x01	// Missing Address Mark
#define FDC_S1_NW			0x02	// Not Writable
#define FDC_S1_ND			0x04	// No Data
#define FDC_S1_OR			0x10	// Over Run
#define FDC_S1_DE			0x20	// Data Error
#define FDC_S1_EN			0x80	// End of Cylinder

#define FDC_S2_MD			0x01	// Missing Address Mark in Data Field
#define FDC_S2_BC			0x02	// Bad Cylinder
#define FDC_S2_SN			0x04	// Scan Not Satisfied
#define FDC_S2_SH			0x08	// Scan Equal Hit
#define FDC_S2_WC			0x10	// Wrong Cylinder
#define FDC_S2_DD			0x20	// Data Error in Data Field
#define FDC_S2_CM			0x40	// Control Mark

#define FDC_S3_US0			0x01	// Unit Select 0
#define FDC_S3_US1			0x02	// Unit Select 1
#define FDC_S3_HD			0x04	// Side Select
#define FDC_S3_TS			0x08	// Two Side
#define FDC_S3_T0			0x10	// Track 0
#define FDC_S3_RY			0x20	// Ready
#define FDC_S3_WP			0x40	// Write Protect
#define FDC_S3_FT			0x80	// Fault

#define FDC_CC_MASK						0x1F
#define FDC_CF_MT						0x80
#define FDC_CF_MF						0x40
#define FDC_CF_SK						0x20
#define FDC_CC_READ_TRACK				0x02
#define FDC_CC_SPECIFY					0x03
#define FDC_CC_SENSE_DRIVE_STATUS		0x04
#define FDC_CC_WRITE_DATA				0x05
#define FDC_CC_READ_DATA				0x06
#define FDC_CC_RECALIBRATE				0x07
#define FDC_CC_SENSE_INTERRUPT_STATUS	0x08
#define FDC_CC_WRITE_DELETED_DATA		0x09
#define FDC_CC_READ_ID					0x0A
#define FDC_CC_READ_DELETED_DATA		0x0C
#define FDC_CC_FORMAT_TRACK				0x0D
#define FDC_CC_SEEK						0x0F
#define FDC_CC_SCAN_EQUAL				0x11
#define FDC_CC_SCAN_LOW_OR_EQUAL		0x19
#define FDC_CC_SCAN_HIGH_OR_EQUAL		0x1D
#define FDC_PH_IDLE						0
#define FDC_PH_COMMAND					1
#define FDC_PH_EXECUTION				2
#define FDC_PH_RESULT					3

	const FDC_CMD_DESC* pFdcCmd;
	BOOL	bFdcIrq;
	BOOL	bFdcHwReset;
	BOOL	bFdcSoftReset;
	BOOL	bFdcDmaInt;
	UINT	nFdcDrvSel;
	UINT	nFdcMotor;
	BYTE	nFdcMainStatus;
	BYTE	nFDCStatus[4];
	BYTE	bFdcCycle;
	BYTE	bFdcCommands[10];
	BYTE	bFdcResults[8];
	BYTE	bFdcPhase;
	BYTE	nFdcCylinder;
	BYTE	nFdcHeadAddres;
	BYTE	nFdcRecord;
	BYTE	nFdcNumber;
	LPBYTE	pFdcDataPtr;

};